MX5: Add AHB clock reporting and fix IPG clock reporting

Signed-off-by: Marek Vasut <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Jason Liu <[email protected]>
Acked-by: Jason Liu <[email protected]>

MX5: Modify the PLL decoding algorithm

The PLL decoding algorithm didn't take into account many configuration bits.
Adjust it according to Linux kernel. Also, add PLL4 for MX53.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Jason Hui <[email protected]>
Tested-by: Jason Liu <[email protected]>

mx53evk: Place machine ID into board config

Let common code set the machine ID.

Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Stefano Babic <[email protected]>
Acked-by: Jason Liu <[email protected]>

mx53ard: Place machine ID into board config

Let common code set the machine ID.

Signed-off-by: Fabio Estevam <[email protected]>

mx53smd: Place machine ID into board config

Let common code set the machine ID.

Signed-off-by: Fabio Estevam <[email protected]>

mx53loco: Place machine ID into board config

Let common code set the machine ID.

Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Jason Liu <[email protected]>

mx51evk: Place machine ID into board config

Let common code set the machine ID.

Signed-off-by: Fabio Estevam <[email protected]>

imx31_litekit: Place machine ID into board config

Let common code set the machine ID.

Signed-off-by: Fabio Estevam <[email protected]>

mx31ads: Place machine ID into board config

Let common code set the machine ID.

Signed-off-by: Fabio Estevam <[email protected]>

mx25pdk: Place machine ID into board config

Let common code set the machine ID.

Signed-off-by: Fabio Estevam <[email protected]>

mx31pdk: Place machine ID into board config

Let common code set the machine ID.

Signed-off-by: Fabio Estevam <[email protected]>

imx31_litekit: Remove dram_init_banksize()

As only one RAM bank is used we can rely on the code from arch/arm/lib/board.c

Signed-off-by: Fabio Estevam <[email protected]>

mx31ads: Remove dram_init_banksize()

As only one RAM bank is used we can rely on the code from arch/arm/lib/board.c

Signed-off-by: Fabio Estevam <[email protected]>

mx25pdk: Remove dram_init_banksize()

As only one RAM bank is used we can rely on the code from arch/arm/lib/board.c

Signed-off-by: Fabio Estevam <[email protected]>

mx31pdk: Remove dram_init_banksize()

As only one RAM bank is used we can rely on the code from arch/arm/lib/board.c

Signed-off-by: Fabio Estevam <[email protected]>

FEC: Move imx_get_mac_from_fuse() definition to fec_mxc.h

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

FEC: Squish "got MAC from fuse" message, make it debug()

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

FEC: Add timeout for chip reset

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

FEC: Allow registering MII postconfiguration callback

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

FEC: Allow multiple FECes

This patch allows user to register multiple FEC controllers. To preserve
compatibility with older boards, the mxcfec_register() call is still in place.
To use multiple controllers, new macro is in place, the mxcfec_register_multi(),
which takes more arguments. The syntax is:

mxcfec_register_multi(bd, FEC ID, FEC PHY ID on the MII bus, base address);

To disable the fecmxc_register() compatibility stuff, define the macro
CONFIG_FEC_MXC_MULTI. This will remove the requirement for defining IMX_FEC_BASE
and CONFIG_FEC_MXC_PHYADDR.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

FEC: Abstract access to fec->eth in MII operations

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

FEC: Allow selection of MII mode via CONFIG_FEC_XCV_TYPE

The default is MII100, which was hardcoded previously in the driver.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

FEC: Add RMII mode support

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

FEC: Kill mode select FIXME's

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

FEC: Use defined constant instead of magic number

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

FEC: Use proper accessor to read register in debug call

Signed-off-by: Marek Vasut <[email protected]>
Cc: Ben Warren <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Wolfgang Denk <[email protected]>
Cc: Detlev Zundel <[email protected]>

cosmetic: fsl_pmic: cosmetic for the help message

This is cosmetic patch for the help message:

Before:
pmic dump [numregs] dump registers
After:
pmic dump [numregs] - dump registers

Signed-off-by: Jason Liu <[email protected]>
Acked-by: Stefano Babic <[email protected]>

EfikaMX: Adjust undocumented magic constant in config file

This magic constant with zero documentation, when it's last 8 bits are set to
0x45, configures correctly the PERCLK dividers. Therefore the I2C operates
correctly when divider computed from PERCLK.

Note: This constant is written to CBCDR register in
arch/arm/cpu/armv7/mx5/lowlevel_init.S, but it's written only once. The register
is accessed three more times in the file, with different values written to it
each time.

Signed-off-by: Marek Vasut <[email protected]>

MX31: Disable watchdog during low-power modes

Turn on the watchdog WDZST bit so that watchdog timer does not count during low power modes.

Prior to applying this patch mx31pdk board got watchdog resets because when it booted in the Linux prompt
and there was no activity, the system entered into idle mode while watchdog timer was still active.

Fix this by disabling watchdog timer during idle mode.

Signed-off-by: Fabio Estevam <[email protected]>

MX25: Add initial support for MX25PDK

Add the initial support for MX25PDK booting from SD card via internal boot.

Signed-off-by: Fabio Estevam <[email protected]>

MX25: tx25: Avoid the usage of extern in C file

Avoid the usage of extern in C file as pointed out by checkpatch.

Signed-off-by: Fabio Estevam <[email protected]>

mx31pdk: Change the prompt as per other i.MX boards

Change the prompt as done in other i.MX boards.

Signed-off-by: Fabio Estevam <[email protected]>

MX31: Improve readability for reset cause

Currently the reset cause is printed like:
CPU:   Freescale i.MX31 rev 2.0 at 531 MHz.Reset cause: POR

Improve readability by adding a new line like it is done on other i.MX boards.

Signed-off-by: Fabio Estevam <[email protected]>

MX31: mx31pdk: Remove nand_spl config.mk file

No need to have a config.mk to only store a single line.

Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Stefano Babic <[email protected]>

ARM: mx25: Print the source of reset

Print the source of reset during boot.

Signed-off-by: Fabio Estevam <[email protected]>

ARM: mx25: Print the silicon revison

Print the silicon revison during boot.

Signed-off-by: Fabio Estevam <[email protected]>

arm, davinci, da8xx: add cpuinfo

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

arm, davinci, am1808: add lowlevel functions for booting from NOR

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

arm, davinci: add NOR Boot Configuration Word

to add the "NOR Boot Configuration Word" on AM18xx based boards,
define CONFIG_SYS_DV_NOR_BOOT_CFG.

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

arm, davinci: add ddr2 definition

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

arm, davinci, am1808, gpio: add missing defines for bank 8

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

arm, davinci: add some missing defines in hardware.h

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

arm, davinci: add SYSCFG1 base and register struct

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

rtc, davinci: add support for davinci internal RTC

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

arm, davinci: add RTC base addr

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

arm, davinci: add internal WDT support for AM1808 cpus

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

arm, davinci: add missing timer baseaddresses for !DA8xx cpu

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

arm, davinci: move davinci_timer in header file

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

net, davinci_emac: let the EMAC detect the PHYs

Once the MDIO state machine has been initialized and enabled, it
starts polling all 32 PHY addresses on the MDIO bus, looking for
an active PHY. Add a 5 ms delay, so all PHYs are for sure detected.

This problem was detected on the cmc board with a KSZ8864 switch.

Signed-off-by: Heiko Schocher <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

net, davinci_emac: make less verbose - turn printf() into debug()

The PHY driver was too verbose and corrupted the boot message display
like this:

...
Net:   Ethernet PHY: KSZ8873 @ 0x02
DaVinci-EMAC
...

Turn printf() into debug() so we get the expected output again:

...
Net:   DaVinci-EMAC
...

Signed-off-by: Heiko Schocher <[email protected]>
cc: Paulraj Sandeep <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

net, davinci_emac: add KSZ8864 switch

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Cc: Mike Frysinger <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

i2c, davinci: add i2c set speed

Signed-off-by: Heiko Schocher <[email protected]>
Cc: Paulraj Sandeep <[email protected]>
Cc: Albert ARIBAUD <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

Devkit8000: Change console from ttyS2 to ttyO2

The omap serial names have changed from ttySx to ttyOx,
so the console should be also changed to support this.

Signed-off-by: Thomas Weber <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

omap4: update maintainer for omap4 boards

Steve wants to transfer maintainership of OMAP4 boards
to me as he is not working on these boards lately.

CC: Steve Sakoman <[email protected]>
CC: Sandeep Paulraj <[email protected]>
CC: Albert Aribaud <[email protected]>
CC: Wolfgang Denk <[email protected]>
Signed-off-by: Aneesh V <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

omap3evm: env: Fix default console

Change the default console from ttyS2 to ttyO0 to
match the Linux default for the EVM.

Signed-off-by: Sanjeev Premi <[email protected]>
Cc: Sandeep Paulraj <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

omap3: Fix compile warning

Building without option CONFIG_DISPLAY_CPUINFO leads to
this warning:
sys_info.c:50:14: warning: 'rev_s_37xx' defined but not used

Signed-off-by: Sanjeev Premi <[email protected]>
Cc: Sandeep Paulraj <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

mmc: omap: config VMMC, MMC1_PBIAS

Config VMMC voltage to 3V for MMC/SD card slot
and PBIAS settings needed for OMAP4
Fixes MMC/SD detection on boot from eMMC.

Signed-off-by: Balaji T K <[email protected]>
Signed-off-by: Aneesh V <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

mmc: omap: enable high capacity

Enable high capacity to host capability.
Fixes eMMC detection on boot from MMC/SD card.

Signed-off-by: Balaji T K <[email protected]>
Signed-off-by: Aneesh V <[email protected]>
Acked-by: Simon Glass <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

devkit8000: Fix build break

Found a build erros when i ran MAKEALL.
So fix it.

Signed-off-by: Sandeep Paulraj <[email protected]>

omap-common: reorganize spl.c

split-up spl.c into spl.c, spl_mmc.c and spl_nand.c. This avoids problems
with missing defines if a board does not use mmc or nand. This includes
adding spl_ prefix to some functions which are now public. spl_image_t is now
a public type. Added some of the common functions to omap-common.h

Signed-off-by: Simon Schwarz <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

omap3: implement boot parameter saving

Implements the saving of boot params passed by OMAP3 ROM code.

Signed-off-by: Simon Schwarz <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

devkit8000: Add nand-spl support for new SPL

Add NAND SPL support to the devkit8000 config

Signed-off-by: Simon Schwarz <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

omap3: new SPL structure support

Support for the new spl structure. Using the interface defined by Aneesh V for
OMAP4

Signed-off-by: Simon Schwarz <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

spl: Add POWER library to new spl

Adds power library to the new spl

Signed-off-by: Simon Schwarz <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

spl: add NAND Library to new SPL

Adds NAND library to SPL.

Signed-off-by: Simon Schwarz <[email protected]>
Acked-by: Scott Wood <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

omap-common: add nand spl support

Add NAND support for the new SPL structure.

Signed-off-by: Simon Schwarz <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

omap3: Configure RAM bank 0 if in SPL

OMAP3 relied on the memory config done by X-loader or Configuration Header. This
has to be reworked for the implementation of a SPL. This patch configures RAM
bank 0 if CONFIG_SPL_BUILD is set. Settings for Micron-RAM used by devkit8000
are added to mem.h

Signed-off-by: Simon Schwarz <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

omap-common/omap4: relocate early UART clock setup

Moves the early UART clock setup setup_clocks_for_console() from
preloader_console_init() to s_init() of OMAP4.

This is done to prepare for OMAP3 integration.

This patch was posted seperatly to the mailinglist but I decidet - since it is
a prereqesit for this patch to add it. Former port to ML:
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/104395

Signed-off-by: Simon Schwarz <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

overo: Set IEN on GPMC_CLK to support synchronous clocking.

Without this change CS's configured for synchronous clocking cannot
read data.

Signed-off-by: Philip Balister <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

OMAP3: Overo: Update GPMC timing for ethernet chip

The existing timing does not quite meet the minimum requirements
in the LAN9221 datasheet. The timing in this patch solves problems
noticed on some parts. The patch also combines the CS configuration
for the overo and igep0020 boards per request.

Signed-off-by: Philip Balister <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

Armada100: Enable 88E3015 PHY support for GplugD

This patch adds support for 88E3015 PHY for Marvell GplugD board.
This patch depends on series of patch which adds support for Marvell
GuruPlug-Display.

Signed-off-by: Ajay Bhargav <[email protected]>

Armada100: Enable Ethernet support for GplugD

This patch enables ethernet support for Marvell GplugD board. Network
related commands works.

Signed-off-by: Ajay Bhargav <[email protected]>

net: Adds Fast Ethernet Controller driver for Armada100

This patch adds support for Fast Ethernet Controller driver for
Armada100 series.

Signed-off-by: Ajay Bhargav <[email protected]>
Signed-off-by: Prafulla Wadaskar <[email protected]>

omap4_panda: Ignore omap4 SPL called MLO

Signed-off-by: Joe Hershberger <[email protected]>
Cc: Joe Hershberger <[email protected]>
Cc: Sandeep Paulraj <[email protected]>

gpio: Add GPIO driver for Marvell SoC Armada100

This patch adds support for generic GPIO driver framework for Marvell
SoC Armada100.

Signed-off-by: Ajay Bhargav <[email protected]>

gpio: Add GPIO driver framework for Marvell SoCs

This patch adds generic GPIO driver framework support for Marvell SoCs.

To enable GPIO driver define CONFIG_MARVELL_GPIO and for GPIO commands
define CONFIG_CMD_GPIO in your board configuration file.

Signed-off-by: Ajay Bhargav <[email protected]>

Prepare v2011.09

Signed-off-by: Wolfgang Denk <[email protected]>

ARM: versatile: delete split_by_variant.sh

Since commit d388298a59ba375c76597b8f95b560afa971a0fb by
Stefano Babic this file is no longer needed so delete it.

Cc: Stefano Babic <[email protected]>
Cc: Loïc Minier <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>

Revert "phylib: remove a couple of redundant code lines"

This reverts commit 041c542219af7f31c372d89b4c7c6f4c8064a8ce.

The lines removed by this commit weren't redundant. The logic is (and
probably should be better commented):

Find the intersection of the advertised capabilities of both sides of
the link (lpa).
From that intersection, find the highest capability we can run at
(that will be the negotiated link).

Now imagine that the intersection (lpa) is (LPA_100HALF | LPA_10FULL).

The code will now set phydev->speed to 100, and phydev->duplex to 1,
but this link does not support 100FULL.

Kudos to Andy Fleming <[email protected]> for binging this to
attention and for the explanation.

Signed-off-by: Wolfgang Denk <[email protected]>

doc/README.scrapyard: Update board removal commit IDs

Signed-off-by: Wolfgang Denk <[email protected]>

Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM: remove broken "ixdp425" and "ixpdg425" boards

ARM: remove broken "ixdp425" and "ixpdg425" boards

Signed-off-by: Albert ARIBAUD <[email protected]>
Acked-by: Stefan Roese <[email protected]>

ASIX: Fix buffer access in asix_get_phy_addr()

Signed-off-by: Marek Vasut <[email protected]>

Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  OMAP3: beagle: Fix build warning in beagle.c

doc: provide a correct board_init_r definition path

This is a trivial fix in the documentation, which corrects
board_init_r() source reference.

Signed-off-by: Vladimir Zapolskiy <[email protected]>
Acked-by: Mike Frysinger <[email protected]>

OMAP3: beagle: Fix build warning in beagle.c

Fix build warning

beagle.c:532: warning: initialization from incompatible pointer type

Signed-off-by: Dirk Behme <[email protected]>
CC: Jason Kridner <[email protected]>
CC: Koen Kooi <[email protected]>
CC: Joel A Fernandes <[email protected]>
Cc: Greg Turner <[email protected]>
CC: Sandeep Paulraj <[email protected]>
Acked-by: Jason Kridner <[email protected]>

Prepare v2011.09-rc2

Signed-off-by: Wolfgang Denk <[email protected]>

Minor Coding Style Cleanup

Signed-off-by: Wolfgang Denk <[email protected]>

km/common: fix bug in IVM mac address access

The MAC address stored in the inventory eeprom begins at offset 1.

Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
cc: Wolfgang Denk <[email protected]>

sf: fix debug format string warning

On some systems, we get a warning when %lu is used with size_t's, so
use the correct format string.

Signed-off-by: Vadim Bendebury <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>

net: turn name len check into an assert

The new sanity check introduces a printf warning for some systems:
eth.c:233: warning: format '%zu' expects type 'size_t', but argument 3 has type 'int'

Rather than tweak the format string, use the new assert() helper instead.

Signed-off-by: Mike Frysinger <[email protected]>

ignore soc asm-offsets.s

Recent commit a4814a69d3bca6ee05f4bfc4 cleaned up generation of
asm-offsets.s for SoC dirs, but missed adding it to the ignore
list which makes it show up in `git status`.

Signed-off-by: Mike Frysinger <[email protected]>

Drop bogus BOOTFLAG_* definitions

There is no code anywhere that references BOOTFLAG_* so remove these
defines.

Signed-off-by: Wolfgang Denk <[email protected]>
Cc: Heiko Schocher <[email protected]>
Cc: Valentin Longchamp <[email protected]>
Cc: Peter Tyser <[email protected]>

net/bootp.c: fix tftp load if autoload environment var isn't set

Commit 093498669 (Put common autoload code into auto_load() function)
broke handling of autoload environment variable not being set.
The bootp/dhcp code will just keep on requesting IP address forever
and never start TFTP download.

Fix it by moving TftpStart() outside the conditional like it was before.

Signed-off-by: Peter Korsgaard <[email protected]>
Tested-by: Fabio Estevam <[email protected]>
Acked-by: Simon Glass <[email protected]>

ppc4xx: Flush dcache after DDR2 autocalibration with caches on

Flush the dcache before removing the TLB with caches enabled.
Otherwise this might lead to problems later on, e.g. while booting
Linux (as seen on ICON-440SPe).

Signed-off-by: Stefan Roese <[email protected]>

Fix incorrect array size of phy settings for 405EX

Change bd_t->bi_phy* arrays from 1 to 2 for PPC405EX since
405EX has 2 ethernet interfaces.

Signed-off-by: Bernhard Weirich <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

DA830: Fix Build Warning

This commit fixes a build warning in the DA830 EVM build

Signed-off-by: Sandeep Paulraj <[email protected]>

led: remove camel casing of led identifiers globally

Result of running the following command to address Wolfgang's
comment about camel case:

for file in `find . | grep '\.[chS]$'`; do perl -i -pe
's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; done

Discussion:
http://patchwork.ozlabs.org/patch/84988/

Signed-off-by: Jason Kridner <[email protected]>
Signed-off-by: Joel A Fernandes <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

omap4: fix pad configuration settings for SDP and Panda

omap4: fix pad configuration settings for SDP and Panda

Signed-off-by: Aneesh V <[email protected]>
Signed-off-by: Sebastien Jan <[email protected]>
Signed-off-by: David Anders <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>

omap4: IO settings

Tuning some IO settings for better performance and power.
And consolidate all such IO settings at one place.

Signed-off-by: Aneesh V <[email protected]>
Signed-off-by: Sandeep Paulraj <[email protected]>